Reviewed by the CoveragePrep editorial team · Sources: state insurance departments, statutes, exam candidate handbooks · How we research

Claim calculator

Roof depreciation calculator

Find out what an insurer will pay on a roof claim. Pick the roofing material to load its expected life, enter what a new roof costs and how old yours is, and the calculator shows the depreciation, the first actual cash value check and the depreciation you can recover after the roof is replaced.

InterNACHI lists 30 years.
Tear-off and replacement, from the estimate or a contractor bid
Some insurers cap depreciation, for example at 80%
Total you receive
$0
Depreciation
Actual cash value of the roof
Deductible
First check (ACV minus deductible)
Recoverable depreciation after replacement
Your out-of-pocket cost for a new roof

How roof depreciation is calculated

Depreciation = Cost of a new roof × (Roof age ÷ Life expectancy), and Actual cash value = Cost of a new roof − Depreciation.

This is straight-line depreciation. An adjuster can adjust it for condition, and a roof past its expected life is often held at a maximum depreciation instead of reaching zero, which is what the maximum depreciation field is for.

Worked example

A 12-year-old architectural shingle roof (30-year life) is damaged by hail. A new roof costs $18,000 and the deductible is $1,500.

  1. Depreciation: $18,000 × (12 ÷ 30) = $7,200, or 40%
  2. Actual cash value: $18,000 − $7,200 = $10,800
  3. First check: $10,800 − $1,500 = $9,300
  4. After the new roof is installed, the insurer releases the $7,200 holdback, for a total of $16,500. You pay only the deductible.

If the roof is paid at actual cash value only, $9,300 is the whole payment and you cover the other $8,700 of the new roof yourself.

Roof life expectancy and depreciation by material

The expected life drives the whole calculation. These are the roofing lives in InterNACHI's Standard Estimated Life Expectancy Chart for Homes. Where the chart gives a range, the calculator uses the midpoint; for clay or concrete tile, listed as 100+ years, it uses 100.

Roof typeExpected life (years)Depreciation per yearDepreciated after 10 yearsACV of a $15,000 roof at 10 years
Asphalt shingles (3-tab)205%50%$7,500
Asphalt shingles (architectural)303.3%33.3%$10,000
Wood shingles or shakes254%40%$9,000
Fiber cement254%40%$9,000
Metal40 to 801.7%16.7%$12,500
Simulated slate10 to 354.4%44.4%$8,333
Slate60 to 1501%9.5%$13,571
Clay or concrete tile100+1%10%$13,500
Copper70+1.4%14.3%$12,857
Modified bitumen205%50%$7,500
Built-up roofing (BUR)303.3%33.3%$10,000
EPDM rubber15 to 255%50%$7,500
TPO7 to 207.4%74.1%$3,889
Source: InterNACHI, Standard Estimated Life Expectancy Chart for Homes (roofing). Lives assume normal installation, weather and maintenance. Insurers use their own depreciation tables, so treat these as a check on your estimate.

Replacement cost versus actual cash value roofs

On a standard homeowners policy the dwelling, including the roof, is paid at replacement cost when the home is insured to at least 80% of its replacement cost. The insurer pays actual cash value first and the rest once the work is done. Some policies settle roof claims at actual cash value instead, often through an endorsement for older roofs, which is why the same hail storm can leave two neighbors with very different checks. Check the loss settlement section and endorsements of your own policy.

If your home is underinsured, the replacement cost payment can shrink as well. Our 80% rule calculator shows how.

How to check the depreciation on your roof estimate

  • Find the roof lines. Each depreciated line, such as shingles, felt and drip edge, should show an age, a life and a percentage.
  • Prove the age. A building permit, the roofer's invoice or a dated inspection report can show the roof is newer than the estimate assumes.
  • Match the life to the product. A 30-year architectural shingle should not be depreciated as a 20-year 3-tab.
  • Watch the deadline. Replacement cost policies set a time to notify the insurer and finish the work before the holdback is lost. Our recoverable depreciation guide covers the 180-day rule and how to get paid.

Frequently asked questions

How do insurance companies depreciate a roof?

Most use straight-line depreciation: the roof loses the same share of its replacement cost each year of its expected life. A 30-year architectural shingle roof that is 12 years old is 40% depreciated. Adjusters may adjust for condition, and many estimating programs cap depreciation, so the figure on your estimate can differ.

How much does a roof depreciate per year?

It depends on the roofing material. Using InterNACHI's expected lives, 3-tab asphalt shingles lose 5% a year (20-year life), architectural shingles about 3.3% a year (30 years), and a metal roof about 1.7% a year at the 60-year midpoint of its 40 to 80 year range.

Will insurance pay for a full roof replacement?

On a replacement cost policy, usually yes, but in two payments: the actual cash value first, then the held-back depreciation once the roof is replaced. On an actual cash value policy, or if your policy settles roofs at actual cash value, you receive only the depreciated amount minus the deductible.

What is recoverable depreciation on a roof claim?

It is the depreciation the insurer holds back on a replacement cost policy. After the new roof is installed, you send the contractor's final invoice and the insurer releases the holdback, up to what you actually spent. The ISO homeowners form gives you 180 days after the loss to tell the insurer you plan to repair or replace.

Can I make my roof depreciation lower?

You can challenge inputs that are wrong. Proof that the roof is younger than the estimate assumes, such as a permit, invoice or dated photos, lowers depreciation directly. So does a longer rated life, for example a 30-year shingle depreciated as if it were a 20-year 3-tab, and evidence of good condition.

Does a percentage deductible apply to roof claims?

Often, for wind and hail. Many homeowners policies in storm-prone states use a separate wind, hail or hurricane deductible equal to a percentage of the dwelling coverage, commonly 1% to 10%. Choose "% of dwelling coverage" in the calculator and enter your Coverage A limit to see it in dollars.